Pushin Male Elbow Connector – 90° Brass Push-in Fitting with Male Thread

These 90° male elbow push-in connectors — also known as male stud elbows — allow pneumatic tubing to exit at a right angle from a threaded port. The elbow configuration is ideal where space is restricted or where tubing needs to be routed away from equipment without sharp bends that could restrict airflow.

Materials & Construction

• Body: Brass
• O-rings: NBR (nitrile rubber)
• Collar: Brass
• Release sleeve: POM (acetal/Delrin)
• Lock claw: Stainless steel
• BSPT variants: Teflon-coated thread
• BSPP variants: O-ring face seal

Specifications

• Tube sizes: 4mm, 6mm, 8mm, 10mm, 12mm
• Thread options: 1/8", 1/4", 3/8", 1/2" BSPT; 1/8", 1/4", 3/8", 1/2" BSPP; M5; M6
• Elbow angle: 90°
• Working pressure: 150 psi (10.2 bar)
• Vacuum rating: -29.5 in Hg (-750 mmHg)
• Working temperature: 0°C to +60°C
• Media: Compressed air only (not suitable for other gases or liquids)

Compatible Tubing

Suitable for nylon (PA) tube and polyurethane (PU) tubing.

Typical Applications

• Routing tubing at 90° from valve ports and cylinder end caps
• Space-saving connections in compact pneumatic panels
• Connecting actuators where straight connectors would cause tubing to kink
• Pneumatic control cabinets, robotic arms, and conveyor systems